Need S1 tailight sockets and harness. J'ai besoin d'une douille de frein et d'un harnais S1

J'ai besoin d'une douille de frein et d'un harnais S1

I am using google translate to help me
Please forgive me.

I am looking for the rear tail light sockets/harness for an S1 van.

I need the sockets that the bulbs go into.



J'utilise google translate pour m'aider
S'il vous plaît, pardonnez-moi.

Je suis à la recherche des douilles / harnais de feux arrière arrière pour une camionnette S1.

J'ai besoin des prises dans lesquelles les ampoules vont.




I need them shipped to america.
Paypal is ready.

Please help.

S2 harness and plug may work as well.
Also any other dodge bulb socket from that time frame may fit as well.

Please let me know what you have.



J'ai besoin d'eux expédiés en Amérique.
Paypal est prêt.

S'il vous plaît aider.

Le harnais et la prise S2 peuvent également fonctionner.
De même, toute autre douille d'ampoule Dodge de cette période peut également convenir.

S'il vous plaît laissez-moi savoir ce que vous avez.

J'ai replacé au bon endroit

Demande au garage Morin (mystere 43) il est dans "Les partenaires"

Hello masterjr,

Try to call Morin car workshop/garage, maybe it could help you to have jour socket/Harkness for your S1.

I am surprisef that you haven't found yours parts in USA.
Have you tried Rockauto too?

Bizcuite

Hello, in EU the tailight sockets are not the same that in USA.

Maybe give us picture of the parts you need, and with it we can search something similar.

the bulb sockets in the US are different than they sockets are in Europe models






I received one tail light with including harness.

The second lamp i received had one 2 sockets for the bulbs.

I need 2 more sockets for the bulbs.

any chrysler product from those years should all across have the same socket for the bulb.

Possibly S2 sockets would be acceptable as well to fit.

Do you only need the 2 missing sockets ?

And have you got any part's reference that you search to share plz?

You have a similar part if i understand well?

Bizcuite

Bizcuite a écrit:

Do you only need the 2 missing sockets ?

I only require minimum the 2 missing sockets.

would appreciate entire harness cable if available.


sockets from other vehicles of this generation
or years may have similar parts.
those may fit as well.

Bizcuite a écrit:

And have you got any part's reference that you search to share plz?

You have a similar part if i understand well?

Bizcuite

When you buy the new assembly it comes whole with the harness.

One i puchased on ebay is complete and is the total one pictured.


The second one was purchased used. from a recycle parts supplier.
that is the part that is missing the harness and 2 sockets.


original part number

4399680
and


4399681

This would be the assembly as a whole. the harness and also the lamp.

Is it that you search?

https://www.ebay.de/itm/Chrysler-Voyager-GS-Kabel-Kabelsatz-Ruecklicht-Heckleuchte-SOCKET-CABLE-Rear-Lamp-/302628261252

If yes, you must find this part's number: 4414508

Bizcuite

No Bizcuite.
The link you provided is about the US spec harness : 2 bulbs only.
Justin's plan is to retrofit his car from US spec to Euro spec with specific 4 bulbs harness.

Justin, I do not have the complete harness but I will double check if I have only the bulbs and let you know.

Cathophe a écrit:

No Bizcuite.
The link you provided is about the US spec harness : 2 bulbs only.
Justin's plan is to retrofit his car from US spec to Euro spec with specific 4 bulbs harness.

Justin, I do not have the complete harness but I will double check if I have only the bulbs and let you know.

Ok, i understand better now when i see the picture here:
https://www.moparpartsgiant.com/parts-list/1989-dodge-grand-caravan/electrical-lamps-wiring-rear.html
and your photo.

US Chrysler van have 2 bulbs, and in EU 4.
Your search bulb harness for EU.

Not easy to find effectively!!
I search again!

Bizcuite

At this point i only require the bulb socket and some wires.
I can make the rest of the harness myself and adapt into my current wiring.

what I require to make this work is the two missing sockets from the parts i have.

Used recycled parts are okay.

I do not think the sockets are required to be from a caravan.

Sockets from a S2 model or lebaron or daytona may work as well.